Use this model as a starting point, then confirm the site conditions before final configuration.
RB1
RB1 Bus and Coach Wash Machine
A bus and coach wash system combining pre-rinsing, foam brushing and high-pressure rinsing in forward and return passes, for large passenger vehicles within its specified wash dimensions.
Best for: Bus and coach operators planning a dedicated brush-wash bay.
Main functions and buyer value
- Applicable to buses, coaches and large passenger vehicles within the specified dimensions.
- The forward pass combines pre-rinsing, foam brushing and high-pressure rinsing.
- The return pass combines brushing and high-pressure rinsing.
- Plan the electrical supply and compressed-air source before installation.
Key parameters
| Installation size (L x W x H) | 19 m x 6.5 m x 5.5 m |
|---|---|
| Maximum washable size (L x W x H) | 12 m x 2.7 m x 3.9 m |
| Rated power without dryer | 15 kW |
| Power supply | Three-phase AC 380 V, 50 Hz |
| Air source requirement | 0.6-0.8 MPa |
| Estimated wash time | 4.5 minutes/vehicle |
| Estimated electricity consumption | 1.4 kWh/vehicle |
| Estimated water consumption | 90 L/vehicle |
| Estimated liquid consumption | 20-60 ml/vehicle |
Good fit when
Bus and coach operators planning a dedicated brush-wash bay.
Confirm before order
Bay size, vehicle clearance, voltage, water supply, drainage and expected daily washes.
Reply will be stronger if you send
Site photos, layout drawing, target vehicle types and preferred wash process.
Buyer decision guide
How to judge whether RB1 fits your project
Check RB1 against usable bay dimensions before choosing. Reference: Confirm usable bay length, width and height before choosing.
A touchless model is better when the operator wants to reduce brush-contact concerns and keep the bay layout compact.
Applicable to buses, coaches and large passenger vehicles within the specified dimensions. Pump or power reference: Confirm local power supply and wash process requirements.. Drying reference: Review drying expectation together with local climate and service positioning..
Lead time, warranty, spare parts, packing, MOQ and shipping documents should be confirmed after the final configuration.
Buyer FAQ
How do I choose the right configuration?
Start with your bay dimensions, vehicle types, utilities and expected daily washes. Zhike can then review suitable functions, options and installation requirements for your project.
What should I send before quotation?
Country, wash bay dimensions, vehicle size, voltage, water supply, drainage and expected traffic.
Can this model be customized?
Project configuration can be discussed after reviewing site size, wash process and local requirements.
Which commercial details should be confirmed before order?
Lead time, warranty, spare parts plan, packing method, MOQ, shipment documents and installation preparation should be confirmed after the final configuration is selected.
Can Zhike support packing, spare parts and remote installation guidance?
Packing method, spare parts list, remote installation guidance, operator training materials and any on-site support should be confirmed according to the final model, configuration and destination requirements.