S11 vs S11PRO vs S11S vs TS Touchless Car Wash

Quick Answer

Zhike S11, S11PRO, S11S and TS are touchless automatic car wash machines, but they are designed around different buyer priorities. L1-100 (S11) is the balanced nine-step option with a 15 kW pump and four-fan drying. L2-100 (S11PRO) adds an 18.5 kW pump and six-fan drying. L3-100 (S11S) focuses on 3D vehicle positioning and width-sensing spray movement. L3-100Pro (TS) focuses on height sensing and profile-following operation in a larger recommended bay.

Four Models at a Glance

These dimensions are planning references. Final civil dimensions, permitted vehicle envelope and supplied functions must be confirmed in the project drawing and quotation.

Choose S11 When You Need a Balanced Configuration

L1-100 (S11) suits buyers who want a complete nine-step wash sequence, LAVA waterfall foam, 360-degree foam application and four-fan drying without moving to the larger S11PRO planning space. It is often the starting point for a commercial site that wants more functions than a compact entry model.

Choose S11PRO When Pump and Drying Capacity Matter

L2-100 (S11PRO) increases the pump motor from 15 kW to 18.5 kW and changes the drying arrangement from four fans to six. It is the stronger choice when the buyer prioritizes installed washing and drying capacity and the site can accommodate the larger recommended bay.

Choose S11S When Width Sensing Is the Priority

L3-100 (S11S) uses vehicle-positioning information and width sensing to support spray-bar movement around the approved passenger-vehicle range. It should be considered when the project serves varied vehicle widths and the buyer values sensing-based process control.

Choose TS When Profile Following Is the Priority

L3-100Pro (TS) focuses on automatic height sensing and profile-following movement. Its planning space is larger than the other three models in this comparison. The TS material also includes a floor-mat cleaning option whose exact arrangement and inclusion should be confirmed for the selected configuration.

What All Four Models Have in Common

• Touchless body washing using chemical application and high-pressure water
• Configurable wash steps for the agreed project program
• Integrated air drying, with the fan arrangement depending on the model
• Passenger-vehicle operation within the approved dimensional envelope
• Project-specific electrical, water, drainage and climate checks before production

Five Questions Before Requesting a Quotation

1. What is the clear internal length, width and height of the wash bay?
2. What are the maximum vehicle dimensions and expected washes per day?
3. Is the priority stronger drying, width sensing, profile following or a balanced wash package?
4. What voltage, frequency, water pressure, water quality and drainage are available?
5. Which wash stages and optional functions must be included in the final offer?

Frequently Asked Questions

Are S11, S11PRO, S11S and TS all touchless?

Yes. Their main body-wash process uses chemical application and high-pressure water without body brushes.

Is S11PRO simply another name for S11?

No. S11PRO has an 18.5 kW pump, six-fan drying and a larger recommended installation space than S11.

What is the main difference between S11S and TS?

S11S focuses on 3D positioning and width-sensing spray movement. TS focuses on automatic height sensing and profile-following operation.

Which model should I choose for my site?

The correct model depends on the measured bay, vehicle mix, daily volume, utilities, climate and required wash process. Send these details through the project assessment form for a configuration review.

Next step: review the individual pages for S11, S11PRO, S11S and TS, then send your site information before choosing a machine.