Touchless Automatic Car Wash Machines | L1, L2, L3 & L4 Series
Before requesting a quotation
- Wash-bay dimensions and access route
- Vehicle types and expected washes per day
- Local voltage, frequency and water conditions
- Required wash process and optional functions
Choose by Site and Operating Priority
This range covers compact touchless washing, stronger pump and drying configurations, intelligent vehicle sensing, and a wheel-brush-assisted model. The correct choice depends on the usable bay, maximum vehicle size, expected wash volume, utilities and the cleaning experience you want to sell.
| Model | Recommended installation space | Pump | Drying | Reference pressure | Main reason to choose |
|---|---|---|---|---|---|
| L1-50 (S7) | 6.5 × 3.5 × 3.2 m | 15 kW | 4 × 5.5 kW fans | About 80 kg/cm² | Compact seven-step touchless system |
| L1-100 (S11) | 7 × 3.5 × 3.2 m | 15 kW | 4 × 5.5 kW fans | 80–100 kg/cm² | LAVA waterfall foam and nine-step wash |
| L2-100 (S11PRO) | 7.5 × 3.8 × 3.2 m | 18.5 kW | 6 × 5.5 kW fans | 80–150 kg/cm² | Stronger pump and drying capacity |
| L3-100 (S11S) | 7 × 3.5 × 3.2 m | 18.5 kW | 4 × 5.5 kW fans | 80–150 kg/cm² | 3D positioning and width-sensing movement |
| L3-100Pro (TS) | 8 × 3.8 × 3.2 m | 18.5 kW | 4 × 5.5 kW fans | 80–150 kg/cm² | Height sensing and profile-following configuration |
| L4-100 (T5S) | 10 × 4 × 3.2 m | 18.5 kW | 6 × 5.5 kW fans | 80–150 kg/cm² | Independent wheel brushes and swing flushing |
Dimensions and consumption figures are planning references. Final civil dimensions, permitted vehicle envelope, utilities and optional functions are confirmed in the project quotation and installation drawing.
Fast Model Selection
Limited bay space
Start with L1-50 (S7), then verify the clear bay and largest vehicle.
Visible foam experience with a balanced configuration
L1-100 (S11) adds waterfall foam and a nine-step wash while retaining four-fan drying.
Stronger pump and drying
L2-100 (S11PRO) combines an 18.5 kW pump with six fans.
Vehicle sensing and profile control
Compare L3-100 (S11S) and L3-100Pro (TS). Their sensing focus and required site dimensions are different.
More attention to wheels
L4-100 (T5S) adds independent wheel brushes while keeping the main body wash touchless.
Information Needed Before Recommendation
- Country and city
- Clear bay length, width and height
- Entrance, exit and equipment-room layout
- Largest vehicle dimensions and expected vehicle mix
- Expected daily wash volume
- Voltage, frequency, water supply and drainage
- Local climate and preferred wash experience
Site Planning Checklist
Before final model selection, review the automatic car wash machine installation requirements for bay measurements, utilities, drainage, civil work and delivery access.
Project Cost and Quotation Scope
Before comparing offers, review the automatic car wash machine cost factors that can change equipment scope, site work, utilities, installation responsibilities and operating requirements.
After-Sales Planning
Before ordering, use the automatic car wash after-sales support checklist to confirm warranty scope, installation responsibilities, training, documentation and model-matched spare parts in writing.
Water Supply and Recycling Planning
Before finalizing the site, use the automatic car wash water requirements and recycling guide to confirm the water source, supply stability, test results, storage, drainage, reclaimed-water stages and final-rinse needs.
FAQ
Which model is best for every market?
There is no single best model for every project. Site size, vehicle mix, utilities, climate and the operator's service plan should determine the configuration.
Are all listed functions standard?
No. Standard and optional functions vary by model and project. The final configuration must be confirmed in the quotation.
Can Zhike review a floor plan before quotation?
Yes. A measured drawing or a clear site sketch helps avoid recommending a machine that does not fit the available bay.